Resetting the Sunroof

2C_PanoramicSunroofInitialize

In some circumstances resetting the sunroof operation may need to be performed. Some instances where resetting the sunroof may be required include:

• When the 12-volt battery is either disconnected or discharged

• When the sunroof fuse is replaced

• If the sunroof one-touch Auto open/close operation is not functioning properly

To reset the sunroof:

1. Start the vehicle in P (Park).

2. Make sure the power sunshade and sunroof glass are in the fully closed position.

3. Release the switch when the power sunshade and sunroof glass are fully closed.

4. Push the switch forward until the power sunshade and sunroof glass move slightly. Then release the switch.

5. Push and hold the sunroof switch forward again until the power sunshade and sunroof glass slide open and close.

   Do not release the switch until the operation is completed. If you release the switch, start the procedure again from step 2.